VK Microsystems

We do manufacturing of SMPS for Industrial & Medical Instruments. Our SMPS are very reliable & cost effective. We can also manufacture and supply these SMPS as per user requirement.

 (1) Model:- DOPS-301205
Input: - 170-300VAC,50/60Hz
Output: - Dual Isolated Output 12VDC/2A and 5VDC/250mA

(2) Model:- DOPS-302405
Input:- 170-300VAC,50/60Hz
Output:- Dual Isolated Output 24VDC/1A and 5VDC/250mA

These supplies are suitable for Industrial & Medical application, where you want two isolated power supply. Generally one supply is required for your microcontroller and other is for actuator & sensors. We can also provide customer specific power supply also. Our SMPS are one of the best power supply availabe in the market.

Basic Theory of SMPS:-

A switched-mode power supply (switching-mode power supply, SMPS, or switcher) is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a source, like mains power, to a load, such as a personal computer, while converting voltage and current characteristics. An SMPS is usually employed to efficiently provide a regulated output voltage, typically at a level different from the input voltage.

Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions (which minimizes wasted energy). Ideally, a switched-mode power supply dissipates no power. Voltage regulation is achieved by varying the ratio of on-to-off time. In contrast, a linear power supply regulates the output voltage by continually dissipating power in the pass transistor. This higher power conversion efficiency is an important advantage of a switched-mode power supply. Switched-mode power supplies may also be substantially smaller and lighter than a linear supply due to the smaller transformer size and weight.

Switching regulators are used as replacements for the linear regulators when higher efficiency, smaller size or lighter weight are required. They are, however, more complicated; their switching currents can cause electrical noise problems if not carefully suppressed, and simple designs may have a poor power factor.